An easy solution for below grade waterproofing.
Pinnacle's Eco Tight coatings provide a quick and easy solution for below grade waterproofing applications. With Eco Tight coatings, below grade waterproofing can be achieved at 80 mils. In addition, Eco Tight coatings can adhere to “green” concrete without a primer (with a minimum cure time of 48 hours).
Our coatings typically cure within 24-48 hours (depending on application thickness, temperature, and relative humidity). To further expedite jobs, the use of our dual-component sprayer allows for the coating to set instantly.
Eco Tight cured below grade coatings are highly flexible and resilient.
Our below grade systems have impressive elastomeric qualities, allowing the cured membrane to elongate up to 850% with 95% recovery. Therefore, our coatings can adjust to surface shifting and thermal changes without cracking. In addition, our cured coatings do not get brittle in cold temperatures or upon aging. Eco Tight coatings make below grade waterproofing jobs quick, easy, and long-lasting.
Eco Tight Below Grade System 5.0
Eco Tight below grade system 5.0 is a multi-purpose seamless coating system used for sealing below grade concrete structures. Featuring our Eco Tight Drylar™, a quick setting waterproof coating membrane that is cold applied, solvent free and has excellent strength, elasticity and adhesion.
- Concrete structure
- Fillet
- Cavities (seams & cracks) filled with mastic Voxlar™
- Brush applied Eco Tight Zavlar™
- Reinforcing strip of the impregnated geo textile
- Eco Tight Drylar™ Waterproof Membrane - Applied At 70-90 Mil
Note: Pinnacle has a wide selection of below grade solutions available. One of our technical staff would be happy to talk to you about your specific application.
For additional information on our below grade systems please call us at 1-800-901-0088



